Bill types in MDBPro Status

If you have an MDBPro installed on your machine you will see the coin changer and bill acceptor status displayed on the status screen.

The MDBPro status shows you the state and configuration of the payment receiving devices. If you have a credit card reader or bill recycler those too are acknowledged below as check boxes

The Bill Recycler and Credit Card Reader checkboxes are not user editable - the system will display a Check if the device is connected to the MDB harness.

The Coin Changer shows you the types of coins it can accept and the coin count of coins available to dispense of  each type in the changer portion. If the changer is configured to accept one or more tokens they will be displayed as Token.

Reported coin-count limits depend on the changer model and firmware. The reported dispensable count can differ from physical inventory; do not assume a brand-wide maximum applies to every changer.

Bill Validator 1 and Bill Validator 2 display the types of bills they are currently programmed to accept. If you wish to enable or disable a specific bill type or Coupon please refer to the device manufacturers instructions. Acceptance of coin types, tokens and coupons are controlled by each device.

Open the relevant MDBPro or Water Vendor section in the machine details for the corresponding payment source. See Changer Coin Value and Ice and Water source information.