Hourly Report

The Hourly Report page allows a user to see a machine's real-time data broken down into helpful graphs and tables. This article will explain each section of this page, as well as, how to use the visual elements to better understand a machine.

Quick Links


Current Conditions

Current Conditions section

Wondering what the weather conditions are like for a machine or how hard its ice maker is working? The Current Conditions section can be used as a quick check-up on by showing a machine's:

  1. Status,
  2. Local weather and time,
  3. Harvest/vend ratio,
  4. The total revenue within a 24-hour period.

Tip: Click on the machine's status icon to go to the machine's profile page.

Ice & Water Vends

Ice and water vends section

The Ice and Water Vends section shows the machine's vends broken down into bag, bulk, and free ice vends; as well as, the 1, 3, and 5 gallons for water vendors. This is over a 24-hour period.

Activity Graphs

The following three graphs displays the selected machine's activity in different time-frames and visual elements. The activity recorded is as follows:

  • Bag
  • Bulk
  • Door Open
  • 1 gallon
  • 3 gallons
  • 5 gallons
  • IM1 Harvest
  • IM2 Harvest
  • Network Error
  • NEW Bag Failure
  • NEW Bulk Hopper Stuck
  • NEW Incline Auger Jammed
  • NEW Incline-Rake-Bin Motor Overload
  • NEW No Ice
  • NEW Out Of Service
  • NEW Rake Failure

Events Last Hour

Events Last Hour section

The Event Last Hour section shows what a machine has done in the last hour, including any harvests, vends, and errors/alerts.

The vertical axis of the bar graph is dynamic to adapt to a specific machine's information.

The horizontal axis is measured in 5 minute increments. As time progresses the graph will update to show the real-time activity of the machine

Tip: Click a legend item to remove it from the graph.

Note: The horizontal axis on the graph shows the current time on the right, starting at 0 minutes and ending at -60 minutes. As time progresses, the graph will move to left.

Activity per Hour

Activity per Hour section

The Activity per Hour section displays any harvests, vends, and errors/alerts in the last the 24 hours in a bubble chart. A bubble's size will show how often an event occurred within a specific hour.

Note: Similar to the Event Last Hour section, the horizontal axis on this graph shows the current time starting at 0 hours, and ending at -25 hours. As time progresses, the graph will move to left.

Hourly Report table

Hourly Report table

The Hourly Report table reformats the visual data from the Activity per Hour graph into a numerical, table format. Scrolling horizontally shows more data.

Adjusting the Time Frame

While it's beneficial to have a 24-hour view of a machine, it is possible to change the time frame. To do so, click on the calendar icon at the top of the page. A pop-up will prompt you to select a date range (maximum 30 days).

Select a desired date range, then click "View".

Note: Exiting the page will reset the adjusted time frame.

Viewing a Different Machine

The Hourly Report page will only show the data for one machine. To change which machine's data is displayed, click the machine's name at the top right of the page. A drop-down menu will give a list to choose from.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.