Vogt VT-Series Icemaker Fault Codes

Applies to Vogt VT-series ice makers. Use the VT service manual for the applicable machine configuration. This table describes the machine fault indicator, which is different from any separate compressor-protection indicator.

Just Ice machines use a Vogt icemaker which reports errors as flash codes.

These can be seen on the icemaker control panel itself and possibly on a relay in the control panel in the machine if it is wired in for that purpose.

The error code will be displayed on the machine status page along with an alert stating that the icemaker is reporting a fault.

These codes are as described by Vogt in their operations manual:

• 1 Flash – Low Suction Pressure.
• 2 Flashes – High Discharge Pressure.
• 3 Flashes – Low Oil Pressure.
• 4 Flashes – Long Harvest Cycle.
• 5 Flashes – Chopper Motor Fault.
• 6 Flashes – Pumpdown Failure.
• Solid Light – Power Failure. (indicated as 7 on the monitoring system)

Operation Manual is available to download on the Vogt website https://www.vogtice.com/wp-content/uploads/VT-B-Series-Service-Manual-08-27-13.pdf

See the VT-series operation and fault guide for operating context and support information.